α-Oxohydrazones as imine component in the synthesis of 4-functionalized azetidinones by the Staudinger reaction

1-(Methyl-p-tolyl-amino)-3-phenoxy-2-azetidinones 4-COX and 4-R substituted (COX: X=Me, Et, Ph, NMe₂, NEt₂, OBu^t; R=Me, Et, Ph) were smoothly prepared from the corresponding α-(methyl-p-tolyl)hydrazonylated ketones, amides and esters via [2+2] cycloaddition with phenoxyketene. The reaction was generally high-yielding and diastereoselective, leading to β-lactams with a cis relationship between the PhO and the COX moieties, except for R=Ph, where an opposite stereoselectivity was instead observed. The azetidinones represent interesting intermediates which couple protection at N(1) and functionalization at position 4 of the ring. Deprotection of N(1) can be easily attained by oxidative N-N cleavage with magnesium monoperoxyphthalate.     

A mechanistic study of the permeation kinetics through biomembrane models: gemcitabine-phospholipid bilayer interaction

The kinetics of the interaction between Gemcitabine (a new anticancer drug) and phospholipid membrane models was investigated. This kind of study is of particular importance both in hypothesizing the interaction of Gemcitabine with mammalian cell membranes and in evaluating the potentiality of liposomes as a Gemcitabine delivery system. Unilamellar (LUV) and multilamellar (MLV) membrane models were made up of dimyristoylphosphatidylcholine (DMPC), dimyristoylphosphatidic acid sodium salt (DMPA), or a DMPC-DMPA mixture (1:1 molar ratio). Gemcitabine-phospholipid vesicle interaction was studied by differential scanning calorimetry (DSC) measurements performed at different time intervals. The findings showed slower permeation kinetics of Gemcitabine through MLV than LUV which, at the same lipid/water ratio, are characterized by a larger lipid surface in contact with the drug aqueous solution. Another interesting difference between LUV and MLV is the onset of a transient two-peak structure during the DSC scans of MLVs. The effect is due to the unequal distribution of the drug between the outer and inner bilayers of the multilamellar vesicles during the permeation kinetics. At equilibrium the two-peak structure merges into a unique peak. This finding may provide useful information about the lipid bilayer permeability in model membranes.     

Structural characterization techniques for the analysis of semiconductor strained heterostructures

A combined method for structural characterization of strained epitaxial heterostructures involving different techniques such as Rutherford backscattering spectrometry (RBS), multiple crystal X-ray diffractometry (MCD) and transmission electron microscopy (TEM) is presented. In order to obtain a complete characterization of the analysed structure, three different quantities are measured independently: the epilayer thickness, the density of misfit dislocations which may appear at the interface, and the significant components of the strain tensor, mainly the tetragonal distortion, affecting the epilayer lattice. In this way the thermodynamic state and the mechanisms of plastic deformation of the structures can be fully investigated. In this contribution we present and discuss the experimental results concerning a set of InP/GaAs samples having different layer thicknesses ranging from 5 to 500 nm. The thickness of the samples has been determined by RBS. Measurements of in-plane strain and tetragonal distortion have been performed by MCD and RBS-channelling respectively, finally TEM has been used for determining the defects densities and distribution.     

(Bis(1,2,4-triazol-1-yl)methane)silver(I) phosphino complexes: structures and spectroscopic properties of mixed-ligand coordination polymers

Adducts of the ligand bis(1,2,4-triazol-1-yl)methane (tz(2)(CH(2))) of the form AgX:tz(2)(CH(2)):ER(3):MeCN (1:1:1:x) (X = NO(3), R = Ph, E = P, As, or Sb, x = 1 or 2; X = NO(2), ClO(4), O(3)SCF(3), E = P, R = Ph, x = 0, 1 or 2; X = NO(3), ClO(4), E = P, R = cy, x = 1; X = ClO(4), E = As, R = Ph, x = 2) and AgNO(3):tz(2)(CH(2)):P(o-tolyl)(3) (2:2:1) have been synthesized and characterized in the solid state and in solution by analyses, spectral (IR, far-IR, (1)H and (13)C NMR, ESI MS data) data, and conductivity measurements. In the one-dimensional polymers (characterized by X-ray studies) AgNO(3):tz(2)(CH(2)):PPh(3):CH(3)CN (1:1:1:1), AgClO(4):tz(2)(CH(2)):PPh(3):CH(3)CN (1:1:1:2), AgNO(3):tz(2)(CH(2)):AsPh(3): CH(3)CN (1:1:1:2), and AgNO(3):tz(2)(CH(2)):SbPh(3):CH(3)CN (1:1:1:2), the silver atom can be regarded as four-coordinate, the tz(2)(CH(2)) ligands behaving as bridging groups rather than chelates, with no pair of ligands being dominant, quasi-trans, in their interactions. The AgNO(3):tz(2)(CH(2)):P(o-tolyl)(3) (2:2:1) adduct is a two-dimensional polymer containing two independent silver atoms, one four-coordinated unsymmetrically by a pair of triazolyl rings, one P(o-tolyl)(3), and a unidentate nitrate and the second by a quasi-symmetrical O(2)NO chelate and a pair of equivalent triazolyl rings.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

OH-Induced shift from carbon to oxygen acidity in the side-chain deprotonation of 2-, 3- and 4-methoxybenzyl alcohol radical cations in aqueous solution: results from pulse radiolysis and DFT calculations

DFT calculations have been carried out for 2-, 3- and 4-methoxybenzyl alcohol radical cations (1⁺, 3⁺ and 4⁺, respectively) and the α-methyl derivatives 2⁺ and 5⁺ using the UB3LYP/6-31G(d) method. The theoretical results have been compared with the experimental rate constants for deprotonation of 1⁺-5⁺ under acidic and basic conditions. In acidic solution, the decay of 1⁺-5⁺ proceeds by cleavage of the C-H bond, while in the presence of ⁻OH all the radical cations undergo deprotonation from the α-OH group. This pH-dependent change in mechanism has been interpreted qualitatively in terms of simple frontier molecular orbital theory. The ⁻OH induced α-O-H deprotonation is consistent with a charge controlled reaction, whereas the C-H deprotonation, observed when the base is H₂O, appears to be affected by frontier orbital interactions.     

Reaction of the stable silylene Si[(NCH2But)2C6H4-1,2] with lithium amides

The thermally stable silylene Si[(NCH2But)2C6H4-1,2] 1 undergoes oxidative addition reactions with the lithium amides LiNRR'(R = SiMe3, R' = But; R = SiMe3, R' = C6H3Me2-2,6; R = R' = Me or R = R' = Pri) to afford the new lithium amides Li(THF)2[N(R)Si(SiMe3){(NCH2But)2C6H4-1,2}][R = But2 or R = C6H3Me2-2,6 (3a)] or the new tris(amino)functionalised silyllithiums Li(THF)x[Si{(NCH2But)2C6H4-1,2}NRR'][R = SiMe3, R' = C6H3Me2-2,6, x = 2 (3); R = R'= Me, x = 3 (4) or R = R' = Pri, x = 3 (5)]. Compounds 4 and 5 are stable at ambient temperature but compound 3 is thermally labile and converts into 3a upon heating. The pathway for the formation of 2 and 3 is discussed and the X-ray structures of 2-5 are presented.     

Reaction of [CpRu(CH3CN)3]PF6 with bidentate ligands: structural characterization of [{CpRu(CH3CN)2}2(μ-η-dppe)](PF6)2 [dppe=1,2-bis(diphenylphosphino)ethane]

The reaction of [CpRu(CH₃CN)₃]PF₆ with the bidentate ligands L-L=1,2-bis(diphenylphosphino)ethane, dppe, and (1-diphenylarsino-2-diphenylphosphino)ethane, dpadppe, affords mononuclear or dinuclear complexes of formula [CpRu(η²-L-L)(CH₃CN)]PF₆, [{CpRu(CH₃CN)₂}₂(μ-η^1:1-L-L)](PF₆)₂ and [{CpRu(CH₃CN)}₂(μ-η^1:1-L-L)₂](PF₆)₂ (L-L=dppe, dpadppe). All of the compounds are characterized by microanalysis and NMR [¹H and ³¹P{¹H}] spectroscopy. The crystal structure of [{CpRu(CH₃CN)₂}₂(μ-η^1:1-dppe)](PF₆)₂ has been determined by X-ray diffraction analysis. The complex exhibits a dppe ligand bridging two CpRu(CH₃CN)₂ fragments.     

A new approach for the synthesis of K-free nickel hexacyanoferrate

A Ni, Al hydrotalcite-like compound (Htlc) has been proven an useful host material for an alternative synthesis of a K⁺-free mixed hexacyanoferrate Ni_1.5Fe^III(CN)₆, which is very difficult to obtain in bulk. The first stage of the procedure consists in the intercalation of hexacyanoferrate(III) inside the Htlc structure. The intercalated Htlc has been treated with a NiNO₃ solution. The obtained material has been characterized by XRD, XAS Raman and FT-IR spectroscopy. The voltammetric response of the compound obtained after the complete solubilization of the Htlc host shows a typical fingerprint of nickel hexacyanoferrate material with a very low level of potassium. Elemental analysis confirmed the absence of K⁺ and thus the occurrence of K⁺-free nickel hexacyanoferrate (14% yield).     

Tetramethylcyclopentadienylselenium derivatives

Bis(1,2,3,4-tetramethylcyclopentadienyl)selane (1) has been prepared by the reaction of tetramethylcyclopentadienyllithium (Cp(t)Li) with selenium bis(diethyldithiocarbamate). Treatment of Cp(t)Li with elemental selenium, followed by air oxidation, led to loss of the allylic hydrogen atom, and formation of the novel tricyclic compound 1,4,5,6,7,10,11,12-octamethyltricyclo[7.3.0.0]-2,8-diselenadodeca-3,5,9,11-tetraene (2). The sulfur analogue of 2 has been obtained by a similar procedure. The X-ray crystal structures of compounds 1 and 2 have been determined, and the molecular geometry observed for has been probed using DFT calculations.